{ "id": "tap-water-filter", "sku": "tap-water-filter", "title": "Stainless Steel Tap Water Filter", "slug": "tap-water-filter", "price": 159.99, "currency": "AUD", "availability": "in_stock", "category": "water-filters", "category_label": "Water Filters", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "250 g", "images": [ "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/main-tap-water-filter.jpg", "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/tap-water-filter-2.jpg", "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/tap-water-filter-3.jpg", "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/tap-water-filter-4.jpg", "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/tap-water-filter-5.jpg", "https://homeimprovement.net.au/dropship-images/water-filters/tap-water-filter/tap-water-filter-6.jpg" ], "description_short": "A multi-stage cartridge of activated carbon, ceramic balls and a 1 micron microfilter is designed to reduce chlorine taste and odours, while a side lever lets you flick between filtered and unfiltered flow.", "description": "The problem with the glass of water you just poured\n\nMost mains water in town supplies is treated with chlorine before it reaches the house. That is normal, and it is why the water arriving at your kitchen is safe for drinking. The side effect is taste. You notice it most in a plain glass of cold water, in tea, and in the first coffee of the day where a faint chlorine note sits behind everything else.\n\nSome people stop noticing. Others buy bottled water, which turns into a weekly chore of carrying heavy packs home. A lot of households land on a filter jug, fill it once, and then lose interest when it needs refilling at the exact moment they want a drink.\n\nA tap water filter takes a different route. It sits at the end of the tap you already use and treats the water as it comes out. There is nothing to fill, nothing to wait for and no bench space to surrender.\n\nHow a tap-mounted filter actually works\n\nThe idea is simple. You unscrew the aerator at the end of your kitchen spout, which is the little mesh insert that breaks the stream up, and you thread the filter on in its place. Water now has to pass through a cartridge before it reaches your glass.\n\nInside this cartridge there are three elements working together. Activated carbon does the heavy lifting on taste and smell, which is the main complaint with chlorinated mains water. Ceramic balls form part of the media bed. A 1 micron microfilter handles the fine end of the particle range. Put together, the cartridge is designed to reduce chlorine and unpleasant odours so the water tastes better.\n\nIt helps to be straight about the limits. This unit is not designed to reduce water hardness. If your kettle furs up quickly, that is hardness, and a carbon tap filter is not the answer for it. We also do not quote removal percentages or claim anything about contaminants that the maker does not name. What the filter is built to do is improve the taste and smell of drinkable mains water.\n\nThe lever is the part you will use most\n\nThere is a lever on the side of the housing. Push it one way and water runs through the cartridge. Push it the other way and you get ordinary unfiltered tap flow.\n\nThat matters more than it sounds. Filtered water is for drinking, the kettle, the coffee machine and filling bottles. Unfiltered is for everything else, washing up, rinsing a chopping board, filling a pasta pot, hosing down a baking tray. Running every single litre through a cartridge just burns through filter life for no gain, and filtered flow is gentler than a wide-open tap because the water has to pass through the media.\n\nOn this unit the lever is stainless steel, as are the housing, aerator and connector. Levers are the part that gets flicked back and forth a dozen times a day with wet, soapy hands, so it is a sensible place to spend on material.\n\nWho it suits, and who should look elsewhere\n\nA tap filter makes most sense for renters and anyone who does not want a tradesperson in the kitchen. Nothing is drilled, cut or plumbed. If you move, you unscrew it, put the original aerator back, and take the filter with you. That alone makes it one of the easier answers for people hunting the best rental friendly water filter.\n\nIt also suits small kitchens. At 6 cm x 6 cm x 11 cm and 250 g, it lives on the tap rather than on the bench, which is a real win when your counter space is already taken by the toaster and a fruit bowl.\n\nIt is less suited to a few situations. Taps with pull-out spray heads usually cannot take any tap-mounted filter, because the spout detaches. Sensor taps and some designer spouts have non-standard outlets. If you are on tank or bore water rather than mains, this is not the product for you, since it is intended for use with drinkable mains water. And if hardness is the issue, look at equipment made for that instead.\n\nChecking that it will fit before you order\n\nTwo quick checks save a lot of hassle.\n\nFirst, the thread. Unscrew the existing aerator from your spout and look at where the thread sits. If it runs around the inside of the spout you have an internal thread, and if it runs around the outside you have an external one. Measure across it with a ruler. The pack includes a universal adapter for a 20 mm internal thread, an M22 to M24 adapter and an M20 to M22 adapter, plus two sealing rings, which between them cover the taps most people have.\n\nSecond, the clearance. The unit adds roughly 11 cm below the spout outlet. Hold a ruler under your tap and see what is left. Over a deep sink it is rarely a problem, but a low-profile spout over a shallow basin can get tight, especially if you like filling tall bottles. If in doubt, measure before you buy rather than after.\n\nFitting itself is tool free and takes a few minutes. Old aerator off, adapter and sealing ring on, filter threaded up hand tight. If the old aerator is stuck from years of mineral build-up, wrap a cloth around it for grip so you do not scratch the finish.\n\nLiving with it day to day\n\nOnce it is on, the routine is short. Flick to filtered when you want a drink. Flick back for washing up. Wipe the housing when you clean the sink, using a soft damp cloth rather than an abrasive pad, and dry it so it keeps its finish. Keep bleach and harsh cleaners away from the housing and the tap thread.\n\nIf the filter sits unused for a few days, say after a weekend away, run the tap briefly before you start filtering again. That clears out water that has been standing inside the housing.\n\nThe one thing you do need to diarise is the cartridge. Replace it on the schedule supplied with the product. A household that fills drink bottles for four people every morning will work through a cartridge faster than two people who only use it for tea. If the taste starts drifting back toward untreated water, or flow slows noticeably, that is your cue.\n\nOne more practical note. Run cold water through the cartridge, not hot. Switch to unfiltered before you turn the hot tap on.\n\nThe short version\n\nThis is a compact, tap-mounted filter with a stainless steel housing, aerator, connector and lever, aimed at people who want better-tasting mains water without plumbing or bench clutter. The cartridge combines activated carbon, ceramic balls and a 1 micron microfilter, and is designed to reduce chlorine and unpleasant odours. It does not soften water.\n\nFitting takes minutes with no tools, three adapters and two sealing rings are in the box, and a side lever lets you keep the full-speed tap for everything that is not a drink. Check your thread type and your clearance under the spout, keep to the cartridge replacement schedule, and it is about as low-maintenance as filtered water gets.", "llm_summary": "A tap-mounted kitchen water filter with a stainless steel housing, aerator, connector and diverter lever. The replaceable cartridge combines activated carbon, ceramic balls and a 1 micron microfilter, and is designed to reduce chlorine and unpleasant odours for better-tasting water. It is not designed to reduce water hardness. A side lever switches between filtered and unfiltered flow. Fitting is tool free and takes a few minutes, with a universal adapter for a 20 mm internal thread, an M22 to M24 adapter, an M20 to M22 adapter and two sealing rings included. The unit measures 6 cm x 6 cm x 11 cm and weighs 250 g. It is for use with drinkable mains water. Sold online by Home Improvement Company (homeimprovement.net.au) at $159.99 AUD including GST. Delivery is Australia wide, free on orders over $90, with express at $25. Returns within 15 days on unused items in original packaging, and the Australian Consumer Law applies to every purchase.", "returnable": true, "return_policy": "This store's own change-of-mind window is 15 days from delivery on an unused item in its original packaging with proof of purchase; the customer pays the tracked return postage and no handling or restocking fee applies; direct exchanges are not offered. Australia has no statutory cooling-off period for an ordinary online purchase, so that window is the store's policy rather than a legal right. Separately, the consumer guarantees under the Australian Consumer Law, Schedule 2 to the Competition and Consumer Act 2010, apply to every sale, cannot be excluded, and cover faulty, damaged or misdescribed goods at the store's cost including return postage.", "shipping_profile": "standard", "warranty": null, "brand": "Home Improvement Company", "gtin": null, "mpn": null, "condition": "new", "url": "https://homeimprovement.net.au/tap-water-filter", "canonical_url": "https://homeimprovement.net.au/tap-water-filter", "json_url": "https://homeimprovement.net.au/api/products/tap-water-filter.json", "updated_at": "2026-11-11", "compare_at_price": 191.99 }